User Contributed                                           MET/CAL PROCEDURE
=============================================================================
INSTRUMENT:            Standard Electric Time STD 11-2:Timer
DATE:                  21-Nov-97
AUTHOR:                User Contributed
REVISION:              0
ADJUSTMENT THRESHOLD:  70%
NUMBER OF TESTS:       6
NUMBER OF LINES:       107
CONFIGURATION:         HP 5335A
STANDARD:              Stanford Research FS700
=============================================================================
 STEP    FSC    RANGE NOMINAL        TOLERANCE     MOD1        MOD2  3  4 CON
  1.001  ASK-   R     N              P             M              F        W
  1.002  ASK+                                          X
  1.003  STD          Stanford Research FS700
  1.004  HEAD         * INITIAL CONDITIONS *
  1.005  DISP         Plug the UUT into AC power.
  1.006  DISP         Set the UUT POWER switch to OFF.
  1.007  DISP         Connect the UUT trigger output (rear panel) to the
  1.007  DISP         5335A INPUT A BNC connector.
  1.008  DISP         Set the UUT POWER switch to ON.
  1.009  HEAD         {* Timer Calibration *}
  1.010  JMP          2.001
  1.011  EVAL
  2.001  DISP         Press the UUT 9.999 pushbutton.
  2.002  DISP         On the UUT wired remote control, press the reset (side)
  2.002  DISP         pushbutton.
  2.003  IEEE         [@5335][TERM LF]
  2.004  IEEE         [@5335]IN[D2000]
# 2.005  IEEE         [@5335]FN2, GM0, AF1, CO1, TR1, AS1, AT0.00, BT5.00;
  2.005  IEEE         [@5335]FN2, AF1, CO1, TR1, AS1, AT0.30, BT3.00;
  2.006  IEEE         [@5335]WA1;
  2.007  DISP         On the UUT wired remote control, press the START/STOP
  2.007  DISP         pushbutton.
  2.008  DISP         When the UUT display approches 9.999 seconds, release
  2.008  DISP         the remote START/STOP switch to the STOP position.
  2.009  ACC          9.999T         0.001%
  2.010  IEEE         [@5335][I]
  2.011  MEME
  2.012  MEMI         Use keyboard to enter actual UUT reading in seconds:
  2.013  MEME
  2.014  MEMC         T              1.000%
#!          Test Tol 0.09999, Sys Tol 9.999e-005, TUR 1000.000 (>= 4.00).
  3.001  DISP         Press the UUT 99.99 pushbutton.
  3.002  DISP         On the UUT wired remote control, press the reset (side)
  3.002  DISP         pushbutton.
# 3.003  IEEE         [@5335][TERM LF]
# 3.004  IEEE         [@5335]IN[D2000]
# 3.005  IEEE         [@5335]FN2, GM0, AF1, CO1, TR1, AS1, AT0.00, BT5.00;
  3.003  IEEE         [@5335]RE;
  3.004  IEEE         [@5335]WA1;
  3.005  DISP         On the UUT wired remote control, press the START/STOP
  3.005  DISP         pushbutton.
  3.006  DISP         When the UUT display approches 99.99 seconds, release
  3.006  DISP         the remote START/STOP switch to the STOP position.
  3.007  ACC          99.99T         0.001%
  3.008  IEEE         [@5335][I]
  3.009  MEME
  3.010  MEMI         Use keyboard to enter actual UUT reading in seconds:
  3.011  MEME
  3.012  MEMC         T              1.000%
#!          Test Tol 0.9999, Sys Tol 0.0009999, TUR 1000.000 (>= 4.00).
  4.001  DISP         Press the UUT 999.9 pushbutton.
  4.002  DISP         On the UUT wired remote control, press the reset (side)
  4.002  DISP         pushbutton.
# 4.003  IEEE         [@5335][TERM LF]
# 4.004  IEEE         [@5335]IN[D2000]
# 4.005  IEEE         [@5335]FN2, GM0, AF1, CO1, TR1, AS1, AT0.00, BT5.00;
  4.003  IEEE         [@5335]RE;
  4.004  IEEE         [@5335]WA1;
  4.005  DISP         On the UUT wired remote control, press the START/STOP
  4.005  DISP         pushbutton.
  4.006  DISP         When the UUT display approches 999.9 seconds, release
  4.006  DISP         the remote START/STOP switch to the STOP position.
  4.007  ACC          999.9T         0.001%
  4.008  IEEE         [@5335][I]
  4.009  MEME
  4.010  MEMI         Use keyboard to enter actual UUT reading in seconds:
  4.011  MEME
  4.012  MEMC         T              1.000%
#!          Test Tol 9.999, Sys Tol 0.009999, TUR 1000.000 (>= 4.00).
  5.001  DISP         Press the UUT 9999. pushbutton.
  5.002  DISP         On the UUT wired remote control, press the reset (side)
  5.002  DISP         pushbutton.
# 5.003  IEEE         [@5335][TERM LF]
# 5.004  IEEE         [@5335]IN[D2000]
# 5.005  IEEE         [@5335]FN2, GM0, AF1, CO1, TR1, AS1, AT0.00, BT5.00;
  5.003  IEEE         [@5335]RE;
  5.004  IEEE         [@5335]WA1;
  5.005  DISP         On the UUT wired remote control, press the START/STOP
  5.005  DISP         pushbutton.
  5.006  DISP         When the UUT display approches 0999. seconds, release
  5.006  DISP         the remote START/STOP switch to the STOP position.
  5.007  ACC          999.T          0.001%
  5.008  IEEE         [@5335][I]
  5.009  MEME
  5.010  MEMI         Use keyboard to enter actual UUT reading in seconds:
  5.011  MEME
  5.012  MEMC         T              1.000%
#!          Test Tol 99.99, Sys Tol 0.09999, TUR 1000.000 (>= 4.00).
  6.001  END
#! T.U.R.s less than 4.00:                  0
#! T.U.R.s estimated using RANGE value:     0
#! T.U.R.s not calculated (ASK- U):         0
#! T.U.R.s not computable at compile time:  0
#! FOR JUSTIFICATION REFER TO COMMENTS FOLLOWING EACH TEST IN THIS LISTING.